2)
Clean the balloon fabric with a mild
dishwashing detergent or a
car wash/wax liquid
which dilutes with up to two gallons of water. Do
not use a harsh detergent or degreaser WHICH may affect the UV coating
and also the finish.
Exception: Use comet with CHLORINE SUBSTITUTE (ChlorinalŽ) to remove mildew spots.
Ultra CLOROX 2 chlorine free bleach for color laundry detergent works
extremely well for cleaning and mildew control.
For best results periodically clean the inside of the balloon
NOTE:
DO NOT MACHINE WASH. Regular application of a vinyl
treatment product such as Sun-of-
a-gunŽ is recommended for the top portion of the balloon.
3)
Periodically revive the Velcro on the balloon and on
the banners by brushing with a thin steel brush.
4)
Occasionally remove the light bulb and spray the socket
with a non-flammable lubricant. This helps keep the contacts
corrosion free.
5)
Always set up the
balloon with all of the stabilizer / leveling jacks extended so
the balloon is level and most of the weight is off of the tires.
Also, chock both tires during set up.
6)
Cover the photo eye with tape or rotate
the eye downward during parades or if the unit is set up under
street lights, bright lights or signs.
7)
Remove the tongue and/or lock the front hitch with a pad lock, and
for extra safety, also run a chain through one of the wheels and
secure with a pad lock.
8)
Use heavy duty cord covers to protect extension cords
that extend over sidewalks and driveways. They are made in five
foot strips and can be purchased at electrical supply stores.